From the service manual:Separation power pack output error
An interrupt checks the status of the power pack every 20 ms. This SC
is issued if the BCU detects a short in the power pack 10 times at D(ac).
Damaged insulation on the high-voltage supply cable
Damaged insulation around the high-voltage power supply
1. Replace the high-voltage supply cable.
2. Replace the high-voltage power supply unit.
3. Replace the IOB.
From Goose's Guide: SC 460 |
Separation output error - check connections to separation plate |
SC 460 |
Separation output error - check SP2-401 bias settings |
SC 460 |
Separation output error - replace HVP (T/TS), rear upper right of machine |
SC 460 |
Separation output error - check/reseat CN 205 on IOB |
SC 460 |
Separation output error - replace HVP TTS # AZ320185 |
Bookmarks