good night, I have a machine that takes a lot to call, when it appears with code sc670 and I can not enter the technical mode to cancel, can someone help me?
I thought about updating it, would that solve it? or is the BICU board bad?
good night, I have a machine that takes a lot to call, when it appears with code sc670 and I can not enter the technical mode to cancel, can someone help me?
I thought about updating it, would that solve it? or is the BICU board bad?
An SC670 code is a controller error. You can try unplugging the hdd and see if it will boot with limited functions. You may need to replace the controller board and the ipu as a set.
Yes sounds like a controller issue, I would first try updating the fw, if it will not boot off your fw sd card then I would replace the controller.
However you could also try "reseating" all the controller connections, inc ram etc nothing to loose.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
the problem is that it is not letting me enter the simulation to clear the settings
I downloaded the firmware update, I'll try to do it today
Good afternoon, I've tested the boards on another machine and they're all working.
DRB, BCU, CONTROLLER and HDD.
help!!!
Bookmarks