Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    237
    Rep Power
    20

    Set key counter for mp 301

    Hi guys,

    having problem we key counter. we have done many coin op with set key counter 1515/mp161/mp 171/mp 201 now we are trying to set up this one. we have done 5-113 and set to 11 then in user tools set external charge to copier and turn on. get out of it and copier show that it is in set key counter mode. We have connected to CN 140 check pins for 5vdc and ground also 24vdc and meter pulse. When we short hecon part the copier does go out of set key counter mode. Have volt meter and can see it change fron 5vdc to ovdc. Copier was use for office so circuit should been ok.


  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,068
    Rep Power
    152

    Re: Set key counter for mp 301

    What does the service manual say to do to install a key counter?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here