Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Aug 2017
    Location
    xiamen
    Posts
    14
    Rep Power
    14

    aficio 1075 with SC 624 cant detect trays

    hello folks..

    i been using my 1075 smoothly today when it suddenly gave an error code SC 624. afterwards a phantom "tray 4" appears on the control panel though the copier has only 3 trays.
    worst part all the trays are inactive with the message "load paper to all trays".

    i know this machine inside out and have solved lots of errors but this nasty code has really left me scratching my head..

    any help would be much appreciated. thank you

  2. #2
    Service Manager 2,500+ Posts
    aficio 1075  with SC 624   cant detect trays

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: aficio 1075 with SC 624 cant detect trays

    Probably Defective BCU or PSU
    R.I.P. old friend

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    662
    Rep Power
    38

    Re: aficio 1075 with SC 624 cant detect trays

    SC624, BCU to tray communication error. If re-booting with all of the trays out does not solve it. then yeppers, may be a bad BCU....

  4. #4
    Retired 10,000+ Posts
    aficio 1075  with SC 624   cant detect trays

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: aficio 1075 with SC 624 cant detect trays

    Could be the PFC (Paper Feed Control) board. Located in the back of the lower frame next to the PSU. Check for loose connections and toner/developer on the board. Less expensive than the BCU.

  5. #5
    Technician
    Join Date
    Aug 2017
    Location
    xiamen
    Posts
    14
    Rep Power
    14

    Re: aficio 1075 with SC 624 cant detect trays

    Quote Originally Posted by sandmanmac View Post
    Probably Defective BCU or PSU
    R.I.P. old friend
    No way i refuse to give up on this old dude.

  6. #6
    Technician
    Join Date
    Aug 2017
    Location
    xiamen
    Posts
    14
    Rep Power
    14

    Re: aficio 1075 with SC 624 cant detect trays

    Quote Originally Posted by jonhiker View Post
    SC624, BCU to tray communication error. If re-booting with all of the trays out does not solve it. then yeppers, may be a bad BCU....
    yeah i tried booting with the trays out but it didnt work.. thanks

  7. #7
    Technician
    Join Date
    Aug 2017
    Location
    xiamen
    Posts
    14
    Rep Power
    14

    Re: aficio 1075 with SC 624 cant detect trays

    Quote Originally Posted by slimslob View Post
    Could be the PFC (Paper Feed Control) board. Located in the back of the lower frame next to the PSU. Check for loose connections and toner/developer on the board. Less expensive than the BCU.
    Thanks man i suspected the PFC so i changed the board from another machine which was not in use. problem however is it also went down with the same issue before it went out of use.

    so after the replacement it did not work. ill blow some air on it and clean it up properly to see if it works. if not then ill have to buy a new part and see. The machine boots up, warms up and get to READY. You can hear the beep. the only problem is after that you cant copy because it says load paper onto all trays.

    Thank you.

  8. #8
    Technician
    Join Date
    Aug 2017
    Location
    xiamen
    Posts
    14
    Rep Power
    14

    Re: aficio 1075 with SC 624 cant detect trays

    @sandmanmac was right .. I checked the PSU Carefully and a couple of stuff were fried. so i changed the psu and bam.. the old man is back..

    thanks everyone. for the effort.. beers are on me.. or well maybe milk.

  9. #9
    Senior Tech 250+ Posts DRichard's Avatar
    Join Date
    May 2008
    Location
    Knoxville, TN
    Posts
    482
    Rep Power
    43

    Re: aficio 1075 with SC 624 cant detect trays

    Quote Originally Posted by hotmailpapa View Post
    No way i refuse to give up on this old dude.

    "DUD" doesn't end with a silent "e"...

  10. #10
    Retired 10,000+ Posts
    aficio 1075  with SC 624   cant detect trays

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: aficio 1075 with SC 624 cant detect trays

    Quote Originally Posted by DRichard View Post
    "DUD" doesn't end with a silent "e"...
    Maybe he actually meant dude not dud.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here