Originally Posted by
AjitN
Hi All
I am not very used to Ricoh machines just about 20+ to serve.
I have typical problem (can be with any brand) that machine have IP address and gets PING successfully. When I send print Job over TCP/IP port, job gets transferred from PC (you can see that in print window) but nothing happens further. Even test page gets transferred but no print.
In Test mode Print I am not getting any options like "configuration Page OR PCL Font List".
This is very surprising as, if machine PINGs it means printer board is alive and it should show some kind of error even if job cannot be printed(whats ever may be the reason).
This is the first time I ever seen this ( I worked on Xerox, KM, Ricoh & Canon machines) so any help/suggestions would be greatly appreciated
Thanks in Advance
Bookmarks