Originally Posted by
slimslob
The fusing temperatures for toner used with this model is very precise. It is very important to have the correct paper thickness set. Example, Plain 1 Full color center should be 118 where Plain 2 Full color center should be 123. Plain 1 is 60-74 gms, Plain 2 is 75-80 gms. If the customer is only using 80 gms paper, you could change all settings for plain1 in SP 1105 to match those for Plain2. Check the Operator Instruction Manual for paper thickness tables for other paper types. You may also have to move either up or down one thickness based on paper surface type, e.i. Bond, Letter Head, Semi-gloss, Glossy, Card Stock, etc.
Bookmarks