Likes:
0
Dislikes:
0
-
almost all Ricoh mpc "tearing image transfer belts"
I think this is important to know:
do not remove the image transfer belt ass'y out of the machine when the machine was not properly shut off;
if there was a jam or so, it could be that the color transfer belt rollers are still in contact with the color drums,
thus scratching the belt.
I know there was a tread concerning this matter last month, so don't steel my carrefully built up green dot.
This treat is concerning all Ricoh mpc's (with a belt) while the other treat was for c5501 only;
-
Re: almost all Ricoh mpc "tearing image transfer belts"
spc811:
I switched off the machine with the main switch, so is on display: "wait 2 minutes"...
Meanwhile I used to already open the front cover and already began to remove the pcdu's, so before it actually shuts off...
I thought I could save time with this "procedure".
Oh my:
Always customer called some weeks after, complaining that there is a strange black figure at the side of almost every printout...
After my investigation, always the ITB belt was damaged!
It took me a few months to understand that you never may remove anything out of a Ricoh machine when it is not carrefully shut off!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks