Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    509
    Rep Power
    18

    almost all Ricoh mpc "tearing image transfer belts"

    I think this is important to know:
    do not remove the image transfer belt ass'y out of the machine when the machine was not properly shut off;
    if there was a jam or so, it could be that the color transfer belt rollers are still in contact with the color drums,
    thus scratching the belt.

    I know there was a tread concerning this matter last month, so don't steel my carrefully built up green dot.
    This treat is concerning all Ricoh mpc's (with a belt) while the other treat was for c5501 only;




  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    509
    Rep Power
    18

    Re: almost all Ricoh mpc "tearing image transfer belts"

    spc811:
    I switched off the machine with the main switch, so is on display: "wait 2 minutes"...
    Meanwhile I used to already open the front cover and already began to remove the pcdu's, so before it actually shuts off...
    I thought I could save time with this "procedure".

    Oh my:

    Always customer called some weeks after, complaining that there is a strange black figure at the side of almost every printout...
    After my investigation, always the ITB belt was damaged!
    It took me a few months to understand that you never may remove anything out of a Ricoh machine when it is not carrefully shut off!


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here