Thanks:
0
Dislikes:
0
-
Mp4000 not fusing first page when comes out of sleep
Has anyone ever seen on this machine where the first page that comes out after being turned off or sleep mode does not fuse properly but every page after that is fine ?
-
Re: Mp4000 not fusing first page when comes out of sleep
I have seen this on other Ricoh machines. There is a setting in User Tools that tells the copier not to put out a copy or print until the fuser has warmed all the way up.
-
Re: Mp4000 not fusing first page when comes out of sleep
-
Re: Mp4000 not fusing first page when comes out of sleep
-
Re: Mp4000 not fusing first page when comes out of sleep
Originally Posted by
mrfuser
Fuser idling in sp mode?
Ya think?
-
Re: Mp4000 not fusing first page when comes out of sleep
As little as possible my good fellow
-
Re: Mp4000 not fusing first page when comes out of sleep
Check the hot roller. If it is starting to get a film of toner build up this can happen.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks