I found an SD PS3 card for £70 so far - so I'll check everything out tomorrow and see what I am going to need
I found an SD PS3 card for £70 so far - so I'll check everything out tomorrow and see what I am going to need
as for using k drums as CMY on the mpc4501, there is minor modification needed.
you want to refer to the "drum cheat sheet" which has been developed by some very knowledgable poster(s) on this forum
B2C Drum Cheat Sheet-2.pdf
Woohoo it arrived!
As it had been stored in a cold warehouse, I've left it to stabilize in temperature and humidity before powering up.
IMG_0706.jpg
I see you have the hammer out ready to bash the f^%k out of it if it malfunctions. Might want to return that to the toolbox for the moment
NEVER ASSUME ANYTHING
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
LOL
No that was for the bracket that attaches the finisher to the mfc - it was bent during transit so I removed it and returned it to it's original shape with my 'Manchester Screwdriver' (Brit joke)
It's in a lot better condition than the last Xerox DC242 that I bought. It also has something installed in Slot A I/F which I need to investigate - fingers crossed it's a WiFi card - but there was no Postscript SD card so just ordered one as we use Macs.
Bookmarks