Hello everyone ,
i have an aficio 2401 machine and i want to move it , but the main machine won't separate from the roll feeder !
any suggestions are much appreciated
thank you
Hello everyone ,
i have an aficio 2401 machine and i want to move it , but the main machine won't separate from the roll feeder !
any suggestions are much appreciated
thank you
Look at the rear of the machine down by the lower frame area. You can see the screws holding the roll feeder to the machine frame on either side. Should be 4 screws, If I remember right.
NEVER ASSUME ANYTHING
use the installation procedure but from end to start
Bookmarks