Thanks: 
Likes: does anybody out there have firmware for savin2020 =ricoh aficio 2020
thank you
gary
Dislikes: 0
does anybody out there have firmware for savin2020 =ricoh aficio 2020
thank you
gary
It would be good to know what problem you are trying to solve with firmware.Originally Posted by garyk
Additionally there is a firmware difference between the basic model that is copy only and the MFP model that has a print controller.
don't know if machine is too old trying to get my windows 10 to scan my ricoh aficio 2020(savin4022) to smb it worked on win7 tried to telnet to copier but the commands suggested didnt work said maybe need firmware upgrade
thank you
gary
Firmware will not help.
I don't know how you had it configured to scan to Windows 7?
Possibly Scanrouter? (arrrgh....I thought I'd said that word for the last time)
AF2020 does not have SMB capability.
Whatever the case, there is certainly no F/W that will resolve it.
Scan to email or upgrade
That machine is going to be way too old for scanning to Windows 10 with SMB1 disabled. Ricoh doesn't appear to be releasing any kind of upgrades for models below the MP xxx3 families.
I had always heard that Scanrouter wasn't even fully supported on anything after Windows XP. I tried once to put v2 Light on a Windows 7 to see what happened to no avail.Firmware will not help.
I don't know how you had it configured to scan to Windows 7?
Possibly Scanrouter? (arrrgh....I thought I'd said that word for the last time
AF2020 does not have SMB capability.
Whatever the case, there is certainly no F/W that will resolve it.
Scan to email or upgrade
It wasn't, but the trick I found to get it to work was to turn off UAC.
To be specific, the last firmware update was April 8, 2008. Way before the introduction the introduction of Windows 7 on July 22, 2009, and became generally available on October 22, 2009 let alone Windows 8, 8.1 and 10. To me that indicates the controller hardware won't support it.
Reply With Quote
Bookmarks