MP 2550

[guitar9199]

Perhaps it was a "second hand" machine ..

...I see what you did there....

[Phil B.]

Has anyone ever had this problem. A void area in the print on one side. Not always in the exact spot but same side. Could be a large void area like the sample attached or a very small void. I ran sky shots to see the problem better. I have replaced PCU with a new 1027 PCU. Replaced transfer separation roller. Replaced fuser rollers. All Genuine ricoh parts. Machine has been vacuumed out. They are great for dropping toner on the slit glass. Any suggestions would be appreciated. Thanks

try doing a sky shot on 17" paper if possible.. or legal... it will give you a print defect you can compare to in the " Print Defect Ruler"

[Phil B.]

I recommend a reputable pest control service.

i find condoms work best to avoid lil pests of that sort!

[larryespinosa]

Has anyone ever had this problem. A void area in the print on one side. Not always in the exact spot but same side. Could be a large void area like the sample attached or a very small void. I ran sky shots to see the problem better. I have replaced PCU with a new 1027 PCU. Replaced transfer separation roller. Replaced fuser rollers. All Genuine ricoh parts. Machine has been vacuumed out. They are great for dropping toner on the slit glass. Any suggestions would be appreciated. Thanks

Sent from my iPhone using Tapatalk