Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: No Display MP C3002

    but looking at your posted pics on the mpc2800 the board was a large brd..

  2. #12
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: No Display MP C3002

    Quote Originally Posted by fshead View Post
    i thought it was the bcu board
    On the MPC2800/3300 it WAS the BCU that causes the Polygon mirror motor to fail.
    They have to be changed at the same time to resolve the issue....as Slim stated in an earlier response.

  3. #13
    Service Manager 10,000+ Posts
    No Display MP C3002

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: No Display MP C3002

    Quote Originally Posted by sharpmind View Post
    Guys, if the IPU is defective, will it damage the polygon motor? Is there a chance to repair the IPU and make it work again? What particular component of the IPU is to be repaired if possible?

    Thank you.
    hey man... not on this subject... but you posted about "can ping but not print" when you end the title of the topic in the word " print" we cannot reply to it ( dunno why ) you might want to go and edit that title. BUT you said you have a crossover cable attached... you cannot use that for "network" printing due to the pin outs. that's why you use one from your lapper to the machine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here