Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    MPC4500 toner problem, not typical

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    MPC4500 toner problem, not typical

    Ok, machine asks for toner, I know all about the pump. I can run force toner and watch td sensor and it adds just fine. A day later it is asking again. Any thoughts?

  2. #2
    Bowdog 250+ Posts Gary Bowen's Avatar
    Join Date
    Mar 2008
    Location
    Victoria BC
    Posts
    250
    Rep Power
    37

    Re: MPC4500 toner problem, not typical

    Pump first and if that did not resolve the problem make sure the new hose that comes with the pump gets replaced (could be a slight blockage). Depending on the total volume on the machine (typically 500K to 1000K range) I have had several of the PCU Motors (AX060308), Dev Clutch (AX200300), Development Shaft (B2231148), Gear (AB010367) give problems but normally it was noisy first . I have had to replace the entire Drum Drive Unit (B2231127) because of a stripped gear internally. There is also a small gear inside the PCU/Dev cavity at the rear (AB010368) that can give problems as it drives the Dev Unit.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here