af 2022

[fshead]

Is the registration on jammed copy on ponit?
I never had a motor fail on any of these series.
The fuser units need to be clean,entry guide plate,fingers,cl roller and
as stated b4 check the pressure roller for flat spots.
Did you try running a copy via bypass

[Mark Bbb]

multi feed is due to a worn friction path OR the tray bottom plate pressure that is to heavy ...
Jams in exit without creases is moisture paper (condens on sensor) OR wrong paper size setting OR ...
Never i have replaced a main motor!

[StephenB]

I have never had a main motor failure, many of these out there.

Stick to the basics, Pick up tire, sep pads, clean reg sensor, check the paper tray sensors on the back of machine frame ( easy to miss an out of position sensor)

[Wild Bill]

I have never had a main motor failure, many of these out there.

Stick to the basics, Pick up tire, sep pads, clean reg sensor, check the paper tray sensors on the back of machine frame ( easy to miss an out of position sensor)

Remember...KISS
Very Important Acronym for nubs.

[DRichard]

Remember...KISS
Very Important Acronym for nubs.

So true...

[Mark Bbb]

Also the white bottom plate lift gear - at the rear of the tray holder (on main frame) - could be broken.