Copies (and printings ) from MP 2501 are light. Drum and developer are new (about 2k copies) . |Is there any way to
make them darker?
Copies (and printings ) from MP 2501 are light. Drum and developer are new (about 2k copies) . |Is there any way to
make them darker?
First try converting the black colour to cyan color.
Is this also to light? Then it is not the black PCDU...
Check this out.
Did you clean the laser glass
are you using original drums or compatible
I Used To Live To Fix Things Now i Fix Things To Live
What is the total counter?
Is the grounding plate in contact with the paper transfer roller discharge?
I had the same problem, had to use an OEM drum. Compatible will not give good density for whatever reason.
Saw a previous thread advising to also use Type 28 developer on these.
The term OEM is absolutely no way to be guaranteed of quality. If it is not Genuine Ricoh, it is not guaranteed by Ricoh to perform correctly in Ricoh machines.
Doing a forced toning does not guarantee that toner is added. If Vt does not change, fresh toner is not entering the developer. A common problem with OEM toner is bottle length being too short. Confirm that the bottle is actually turning. Check that nothing is obstructing the toner path from the bottle to the development unit.
Bookmarks