Hello, install a ssd on a Ricoh mp 2852 machine, it works but when you come back from the stand by it indicates sc861 problems with hdd.
will any firmware be necessary?
regards
Hello, install a ssd on a Ricoh mp 2852 machine, it works but when you come back from the stand by it indicates sc861 problems with hdd.
will any firmware be necessary?
regards
did you follow the steps in the manual to install a hdd? i think there are 4 sp modes to enter when doing so.
ive never tried the ssd hdd. not sure how they react. i cant help with that part, sorry.
was it equipped with the SSD to begin with or just a SATA drive?
might wanna try a regular HDD.
That's just terrible logic, man.
You had an HDD error, replaced the HDD with, in all likelihood, an incompatible one, and now you have a different HDD error.
...Not to mention, that it seems you didn't even attempt to to format it in SP mode.
Why would you not take 90 seconds and swap in the style of HDD it was designed to use!?
By the way...in the video you posted you only put the machine into standby mode, and didn't even wait for it to completely shut down, so you're not even rebooting it!
We're all for experimenting with new alternatives but when they don't work and they cause a machine fault you need to go back to what you know.
The machine does NOT support SSD so you just need to bite the bullet and fit a standard SATA HDD...you tried though...props for having a go.
Bookmarks