Originally Posted by
Timmytronic
Hiya. I have had this issue for a while and I can’t see it on the forum for this machine and didn’t know if it’s something silly and common. I get 569-02 Pressure roller release motor. If I change the unit it’s fine but I can’t keep changing the units so on two machines I have changed the sensor, replaced a belt on one of them, checked the mechanism and all seems well.
Any ideas for me what else it could be. I would think the pressure release motor but this is in the machine and if I replace a fused unit from a working machine it’s ok. Had this quite a few times now and still can’t really work it out.
Thanks loads. Tim.
Bookmarks