Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Hello,
    After i replaced the left hinge some 1,5K (DF count) ago, now the pick up roller stays down.
    When i perform an output check on the "transport motor forward" (sp6-008-005) the original stopper fingers (5) goes up and down very quickly...
    Strange is that it worked fine for a while...

    Anyone has a cleu?

  2. #2
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Take the back cover off. There's a solenoid in the back that has two actuators connected to it, one white, one black. One of those will have come off.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Quote Originally Posted by TonerMunkeh View Post
    Take the back cover off. There's a solenoid in the back that has two actuators connected to it, one white, one black. One of those will have come off.
    T.M.:
    I just dis- and reasemble these area.
    The 2 actuators where and are in the whright position.
    I think there is a home position sensor faillure...

  4. #4
    Retired 10,000+ Posts
    adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Quote Originally Posted by Mark Bbb View Post
    T.M.:
    I just dis- and reasemble these area.
    The 2 actuators where and are in the whright position.
    I think there is a home position sensor faillure...
    I think that some junior tech did not reassemble the feed shoe properly.

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Quote Originally Posted by slimslob View Post
    I think that some junior tech did not reassemble the feed shoe properly.
    Slim: feed shoe?
    I have surched on "shoe" in the parts cat, but no match
    ????

  6. #6
    Retired 10,000+ Posts
    adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Quote Originally Posted by Mark Bbb View Post
    Slim: feed shoe?
    I have surched on "shoe" in the parts cat, but no match
    ????
    It refers to the assembly that holds the pick up roller and feed belt. If it is not assembled correctly, it will not properly follow the the lift cam.

  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Quote Originally Posted by slimslob View Post
    It refers to the assembly that holds the pick up roller and feed belt. If it is not assembled correctly, it will not properly follow the the lift cam.
    Slims:
    The shoe is fitted like a glove: it is positioned correct.
    Even without the original feed in unit (shoe?) the original stoppers go "tak tak tak"; up down - up down, realy fast!
    I'm thinking perhaps the DF main board has a failure.

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: adf 3030 (mpc2800 mpc2550). Pick up roller stays down

    Got it:

    The black/white plastic levers/actuators (rear) are tensioned with a black spring (vertical).
    Also the duplex juncion gate plate (rear) is tensioned with a black spring (horizontal).
    Don't mix up those springs...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here