Hello
Someone can tell me the procedure to get into SSP Mode on an Mp201spff
Thank you
Hello
Someone can tell me the procedure to get into SSP Mode on an Mp201spff
Thank you
Not sure if you mistyped that or if there is a different mode i am unaware of...but to get into SP Mode on an MP 201SPF goes as follows.
Clear Modes (Yellow button)
"1" "0" "7"
Hold Stop button (Red button)
For factory service mode it is....
Clear Modes (Yellow Button)
"1" "4" "3"
Press Stop(red) button, then press again and hold....
Hope this is what you were looking for!
I hope too, thank you
After entering service mode, hold down on the # key and select the system box on the screen. Should be in SSP now.
NEVER ASSUME ANYTHING
Bookmarks