Thanks: 
Likes: 
Dislikes: Mpc3001 Error Sc204.
Check harness , replaced polygon motor and reset SC code but the error re-appear. Could it be the drive board and what else can I do.
Mpc3001
Mpc3001 Error Sc204.
Check harness , replaced polygon motor and reset SC code but the error re-appear. Could it be the drive board and what else can I do.
The previous version of this model (C2800/3300) had an issue that when the Polygon motor went (SC204), it also took out the BICU, so you would have to replace the 2 as a set. I can't find any documentation about it for this model, but it sounds like the same thing.Originally Posted by jathrow
Check the green earthing strap on the side door harness, it could be broken. Also there are two springs either side of the PTR assembly that move it backward and forward, one of those coming off can cause this code.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Reply With Quote
Bookmarks