proc7100 problem special coclor

[en.]

hi all

Have a good day

…I have facing issue and I hope if you can help me to solve the problem

The problem is I replaced special color( invisible red) in Leo proc7100 I after update the firmware but now the quality is very light …but when I printing B&W or CMYK the quality is good ..the I put the old special color(white) and its give the same problem

Please can you guide me what I do

[blazebusiness]

hi all

Have a good day

…I have facing issue and I hope if you can help me to solve the problem

The problem is I replaced special color( invisible red) in Leo proc7100 I after update the firmware but now the quality is very light …but when I printing B&W or CMYK the quality is good ..the I put the old special color(white) and its give the same problem

Please can you guide me what I do

You can't just swap out the special color toner cartridge. There is a procedure to follow.
I assume you correctly followed the attached procedure when changing the special color toner and installed the 5th station kit for the new color:

Changing Special Toner Color.pdf

After installing the 5th station for the new special color.....you have to turn the fiery back on. Then log into user tools and go to adjustments for skilled operators. Select machine image quality. Select Adjust image density/dems. Then select DEMS and hit execute.

There is also a tech bulletin out for improving half tone density issues with special colors. It involves updating the fiery firmware.