Wrong PCDU" message in 5th station proc7100x

[en.]

hi every one

have a good day

i have problem with proc7100x ...the customer tray to replace withe color 5 with clear but and he follow the instruction the field service manual also ther is video from Ric oh guide him how to replaced the 5th color but now the machine not goes ready and give him this massage

(The error message "Set PCU clean Unt/Wrong PCDU) :

i do this action

:replaced with Noe 5th color
replace all component (charge & cleaning ) but its give me failed ...

any one can help me

[blazebusiness]

hi every one

have a good day

i have problem with proc7100x ...the customer tray to replace withe color 5 with clear but and he follow the instruction the field service manual also ther is video from Ric oh guide him how to replaced the 5th color but now the machine not goes ready and give him this massage

(The error message "Set PCU clean Unt/Wrong PCDU) :

i do this action

:replaced with Noe 5th color
replace all component (charge & cleaning ) but its give me failed ...

any one can help me

Ricoh actually distributed some bad units and later released an advisory about the problem units. I'll see if I can find you the pdf.

[blazebusiness]

Here you go:

rfg WRONG PCDU Message.pdf

[en.]

hi my friend

thanks for your responding ...i know this pdf i sawand i know this RTB ...this RTB talking about develoment unit in fourteen 2014
but now all my development is in 2016

so just i want to know what the solution ?

[en.]

Here you go:

rfg WRONG PCDU Message.pdf

hi my friend

thanks for your responding ...i know this pdf i sawand i know this RTB ...this RTB talking about develoment unit in fourteen 2014
but now all my development is in 2016

so just i want to know what the solution ?

[blazebusiness]

hi my friend

thanks for your responding ...i know this pdf i sawand i know this RTB ...this RTB talking about develoment unit in fourteen 2014
but now all my development is in 2016

so just i want to know what the solution ?

Even if you did not get one of those bad 2014 units----you may still have a similar issue. The unit has a chip that stores the color information.This chip is blank until installation occurs, and the machine writes the information to the chip upon installation.

Either the part you got didn't have a blank chip or the 5th station installation procedure was not followed correctly.

After installing the 5th station for the new special color.....you have to log into user tools and go to adjustments for skilled operators. Select machine image quality. Select Adjust image density/dems. Then select DEMS and hit execute.

Did someone forget to do this step?

[en.]

Even if you did not get one of those bad 2014 units----you may still have a similar issue. The unit has a chip that stores the color information.This chip is blank until installation occurs, and the machine writes the information to the chip upon installation.

Either the part you got didn't have a blank chip or the 5th station installation procedure was not followed correctly.

After installing the 5th station for the new special color.....you have to log into user tools and go to adjustments for skilled operators. Select machine image quality. Select Adjust image density/dems. Then select DEMS and hit execute.

Did someone forget to do this step?

yes .. i am sure some one forget one of step but now i want to solve the problem ..what should i do to make device reading special color 5th station ??

[Sashko]

Please mail me if you want to know how to solve this issue in the field without change anything.

[Sashko]

Please mail me if you want to know how to solve this issue in the field without change anything.

Use this sequence to return the machine to normal operation:
1 - set to "4th" in SP3-106
2 - switch Off the machine
3 - change the 5th station to colour was before
4 - switch On the machine
5 - change setting to "5" in SP3-106
6 - set the settings according to colour was before in SP3-107-001/002/003 (see table below)
6 - reboot the machine
This sequence of operation clear the condition "Set OPC clean Unt/Wrong PCDU(S)"

SP3-107-XXX	White	Clear	Neon Yellow	Neon Pink
001	3	2	2	2
003	2	1	3	4
003	2	1	1	3

[mrwho]

Use this sequence to return the machine to normal operation:
1 - set to "4th" in SP3-106
2 - switch Off the machine
3 - change the 5th station to colour was before
4 - switch On the machine
5 - change setting to "5" in SP3-106
6 - set the settings according to colour was before in SP3-107-001/002/003 (see table below)
6 - reboot the machine
This sequence of operation clear the condition "Set OPC clean Unt/Wrong PCDU(S)"

SP3-107-XXX	White	Clear	Neon Yellow	Neon Pink
001	3	2	2	2
003	2	1	3	4
003	2	1	1	3

Sorry for digging out this rotten corpse of a thread, but just to say this one saved my proverbial ass. Thank you!