Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1
  1. #1
    Technician
    Join Date
    Dec 2013
    Location
    Houston, MS
    Posts
    15
    Rep Power
    0

    Ricoh Aficio MP2550 / Lanier LD425 - NO! Network Connectivity -

    Have a MFC that's lost it's ability to communicate with the network after about 4 years. RJ45 port has a steady yellow light but an additional green light will momentarily wink on when cold booting the machine. Desire to roll the settings of the machine back to factory, holding down the "./" and the "#" do NOT erase the current assigned network static address nor erase the address book. Have tried a regular cat-5 patch cable but have not created the crossover cable to rule out my network switch. I have pulled the controller board marked "Ricoh" and "D0095278" read here that one guy replaced the board and still had no communications as well as an error code (Currently the machine is not showing any). I'm trying to verify if this is a software or hardware problem. Another guy posted to change the wireless 802.xx to the default settings but mine doesn't show this option in any menu. Attached is a 3 page pdf of the settings and their values.

    Yes, I know i've got to clean up that line on the output as well.

    I don't mind loosing everything but the counters.

    TIA,

    AndyC
    Attached Files Attached Files

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here