Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Field Service Engineer 2,500+ Posts
    MPC3002 SC672-001

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,897
    Rep Power
    52

    MPC3002 SC672-001

    Hello all,

    I'm faced with an SC672 that wont clear, happens as soon as machine powers on after about 5 seconds.

    Disconnected the fax & HDD, machine wont accept a firmware.

    I have reseated all controller connections, still same.

    Any other suggestions?

    Dont really want to order a controller on this old box.

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  2. #2
    Field Supervisor 500+ Posts guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    505
    Rep Power
    13

    Re: MPC3002 SC672-001

    Quote Originally Posted by copier tech View Post
    Hello all,

    I'm faced with an SC672 that wont clear, happens as soon as machine powers on after about 5 seconds.

    Disconnected the fax & HDD, machine wont accept a firmware.

    I have reseated all controller connections, still same.

    Any other suggestions?

    Dont really want to order a controller on this old box.


    Check the setting of SP5-875-001. If the setting is set to "1 (OFF)",
    change it to "0 (ON)"


  3. #3
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,477
    Rep Power
    183

    Re: MPC3002 SC672-001

    Check the connection between the control panel and the controller.


  4. #4
    Field Service Engineer 2,500+ Posts
    MPC3002 SC672-001

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,897
    Rep Power
    52

    Re: MPC3002 SC672-001

    Cant get in SP mode, removed & reseated all connections inc panel USB cable etc.

    Hopefully customer will upgrade...........................

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    Technician
    Join Date
    Feb 2018
    Location
    Bogota
    Posts
    26
    Rep Power
    2

    Re: MPC3002 SC672-001

    Hello


    what done?


    1) I remove the hard drive and the memory
    I enter a system


    I copy the ram


    I erase errors 7807


    turn off
    firmware charge


    turn off


    I connect disco and I put memories


    prendo and full


    sometimes had to erase memory 5801 doing everything else


    You always help me .. I would like you to be able to repay this time


    regards


  6. #6
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,477
    Rep Power
    183

    Re: MPC3002 SC672-001

    Quote Originally Posted by copier tech View Post
    Cant get in SP mode, removed & reseated all connections inc panel USB cable etc.

    Hopefully customer will upgrade...........................
    If it comes back intermittently, reseat the other end of the USB.


  7. #7
    Field Service Engineer 2,500+ Posts
    MPC3002 SC672-001

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,897
    Rep Power
    52

    Re: MPC3002 SC672-001

    Quote Originally Posted by slimslob View Post
    If it comes back intermittently, reseat the other end of the USB.
    Unfortunately its a permanent error, powered off/on multiple times.

    HDD & fax removed same error.

    If customer doesnt upgrade will return to base to work on.

    Appreciate the advice as always. 🙂

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    615
    Rep Power
    26

    Re: MPC3002 SC672-001

    You may need to replace the controller and the IPU as a set.


  9. #9
    Senior Tech 250+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    257
    Rep Power
    22

    Re: MPC3002 SC672-001

    i had one that be find then throw code sometimes right away or day or two later. Turns out was the operation panel was bad. other things can be the usb cable that runs from board in back to the operation panel. my was the op assy.


  10. #10
    Trusted Tech 50+ Posts
    MPC3002 SC672-001

    JDYAL's Avatar
    Join Date
    Sep 2008
    Location
    Sunshine Beach Fl
    Posts
    60
    Rep Power
    21

    Re: MPC3002 SC672-001

    I've had this code on two different machines a wide format MPCW2200 and a MPC3002. The Mpcw2200 was the controller board and the mpc3002 was the op panel. Not a big fan sc672-001 it will definitely give you nightmares.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here