MPC 3003 Slow Printing

[keithxxiii]

Gents,

I was scratching my head on this issue. Firmwares are updated, HDD reformatted, Printer App, NCS has been reset but still prints slow in some particular PDFs.
The PDF was the scanned document from the device. If you compare the print speed from a word-converted PDF, it prints fast within 2 seconds. Tried printing thru my cable and got the same slow result.

The printer driver is a UPD since the device is connected to a Print Management software.

*it prints slow on scanned documents only!

I have simulated the same document to an older device with the same print driver and guess what, it prints within 4 seconds! I called up the IT to try to install the normal PCL driver from ricoh to test it. Awaiting for his input as I am on my way to visit the site.

[thetechnician]

Have you tried telling it to print the pdf as image?

Screen Shot 2018-08-23 at 5.15.21 pm.jpg

[TonerMunkeh]

Unless it's running a solution, switch Java off with SP 5730. That has a dramatic effect on print speed due to more available memory.

[Mark Bbb]

You write:
"The printer driver is a UPD since the device is connected to a Print Management software."

There is your problem (my guess)

[keithxxiii]

You write:
"The printer driver is a UPD since the device is connected to a Print Management software."

There is your problem (my guess)

The solution design was a central printer queue then the job will be released to any of the devices (MPC 3003, MPC 4503 and MPC 3002). I will give it a try to setup a central queue with the original PCL driver and see the results. BTW, it prints slow on the MPC 3003 only

[slimslob]

Also check that the port is set to TCP/IP. Microsoft has a nasty habit of installing printers on WSD ports.

[Phil B.]

Also check that the port is set to TCP/IP. Microsoft has a nasty habit of installing printers on WSD ports.

yup THANKS MIRCOSOFTIE! that's one reason I got out of computers years ago... constantly changing OS... costing me $$$ each time.

[copier tech]

Unless it's running a solution, switch Java off with SP 5730. That has a dramatic effect on print speed due to more available memory.

Interesting, I may start turning this off on a few of my devices & monitor the print speed.

[8T2]

I disable WSD print and scan on all the devices I install, just saves time on callbacks due to slow printing or with user codes not working because WSD installed Ricoh class rubbish driver

[keithxxiii]

UPDATE:

Printed thru FTP = within 3 secs
Printed thru direct cable = 5 seconds
Printing thru network = 25 seconds....

I have asked the IT to change the ports maybe? from his switch

We'll see tomorrow for the update