Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Senior Tech 1,000+ Posts
    MPC 3003 Slow Printing

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,122
    Rep Power
    54

    Re: MPC 3003 Slow Printing

    This may be a shot in the dark, but there are fuser temp and idle settings that effect print speed. Run a non-default smc and see if any of these have been taken out of specs. After re-reading your last post, this is probably not the case. 25 seconds for network printing = network issue I would say.

    NEVER ASSUME ANYTHING

  2. #12
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,086
    Rep Power
    36

    Re: MPC 3003 Slow Printing

    Quote Originally Posted by slimslob View Post
    Also check that the port is set to TCP/IP. Microsoft has a nasty habit of installing printers on WSD ports.
    i see that WSD all too many times...........


  3. #13
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,086
    Rep Power
    36

    Re: MPC 3003 Slow Printing

    Quote Originally Posted by TonerMunkeh View Post
    Unless it's running a solution, switch Java off with SP 5730. That has a dramatic effect on print speed due to more available memory.
    not to hijack a tread but is JAVA the issue with the c3003 taking so long to load all options on full restart ?


  4. #14
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,545
    Rep Power
    185

    Re: MPC 3003 Slow Printing

    Quote Originally Posted by fshead View Post
    not to hijack a tread but is JAVA the issue with the c3003 taking so long to load all options on full restart ?
    My experience is that if JAVA is enabled, you cannot get into most SP and User Tools options until it finishes loading (abut 5 minutes).


  5. #15
    Just a tech 100+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    179
    Rep Power
    11

    Re: MPC 3003 Slow Printing

    Update:

    I have asked the IT to trace where the port is connected and try to change it. Was waiting for his tracing tool and there it goes. When he changed the port, it worked like charm.

    Thanks for all your suggestions. Highly appreciated!


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here