Originally Posted by
slimslob
Now to the possible cause of your problem. Your profile says you are located in Zimbabwe. You indicate that you live in Harate which I cannot locate so I am thinking Harare. That would put you in a humid sub tropical climate or humid sub tropical/oceanic highland climate. The MP C2011 has a humidity range of 15 to 80% non condensing. At the high end, it needs to be running 24/7 in order for the fusing unit to keep it non condensing. Either that or you need to install anti condensation heaters. If you are getting condensation on the drums, there could be arcing that will cause pin holing of the drums which will cause the error. You need to do something about the humidity then replace the drums. If the humidity is not taken care of, you will to have premature drum failure.
Bookmarks