Results 1 to 7 of 7

Thread: MP3054

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    249
    Rep Power
    0

    MP3054

    Hi,

    when you change the PCDU unit on this one, it adjust the developer and ID sensor itself ?
    Because changed at two machines the complete PCDU, now both customers complained about light images, copy as well prints.
    Is there an SP mode to adjust?

    No much experience on this one

    Thanks in advance . . .


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Location
    porto
    Posts
    132
    Rep Power
    21

    Re: MP3054

    Quote Originally Posted by GeorgeBest View Post
    Hi,

    when you change the PCDU unit on this one, it adjust the developer and ID sensor itself ?
    Because changed at two machines the complete PCDU, now both customers complained about light images, copy as well prints.
    Is there an SP mode to adjust?

    No much experience on this one

    Thanks in advance . . .
    when i change the pcdu ,i always adjust developer inicial setting (2-801)


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    249
    Rep Power
    0

    Re: MP3054

    mabey I am wrong, but there is no SP2801 (?)

    Quote Originally Posted by francisco View Post
    when i change the pcdu ,i always adjust developer inicial setting (2-801)



  4. #4
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Location
    porto
    Posts
    132
    Rep Power
    21

    Re: MP3054

    Quote Originally Posted by GeorgeBest View Post
    mabey I am wrong, but there is no SP2801 (?)
    sorry, 2801 was in older models.

    sp 3011 manual procon exe, 3012 to see if it is ok

    but if you turn sp 3701-xxx to 1 and turn off ,the machine do autm .


  5. #5
    Field Service Engineer 2,500+ Posts
    MP3054

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,849
    Rep Power
    51

    Re: MP3054

    Quote Originally Posted by GeorgeBest View Post
    Hi,

    when you change the PCDU unit on this one, it adjust the developer and ID sensor itself ?
    Because changed at two machines the complete PCDU, now both customers complained about light images, copy as well prints.
    Is there an SP mode to adjust?

    No much experience on this one

    Thanks in advance . . .
    I always rebuild these units, much cheaper to replace OPC, Blade, Charge roller, charge cleaning roller & developer.

    As per service manual reset couters & init developer.

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  6. #6
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba
    Posts
    1,237
    Rep Power
    37

    Re: MP3054

    Make sure that the bung was removed from the dev opening on the PCDU....very easy to miss.
    The copies will start out fine then go light due to no toner being added to the dev.


  7. #7
    Senior Tech
    Join Date
    Dec 2015
    Location
    Laidley North
    Posts
    2
    Rep Power
    0

    Wink Re: MP3054

    Quote Originally Posted by Oze View Post
    Make sure that the bung was removed from the dev opening on the PCDU....very easy to miss.
    The copies will start out fine then go light due to no toner being added to the dev.
    Agreed, done it myself! Also, definitely make sure that you have either done SP3701 OR go into the PM counter menu at the main service mode screen, and change new unit to yes (some you just press the button) then it will tell you to restart and automatically perform the necessary adjustments.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here