Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts
    c4502 c5502 Feedder

    tinfox's Avatar
    Join Date
    Nov 2007
    Posts
    284
    Rep Power
    25

    c4502 c5502 Feedder

    I just got back from a service call where the feeder is jamming. The rear side of the feeder cover is lifting up while feeding. The clip in the rear is not holding under pressure. If I slide the whole top cover asm towards the rear it will stick. I may have to put washers in the middle between the screw that lets you remove the top cover and the screw hole to keep it slide over towards the rear.

    Anyone seen this before? Can the metal be any thinner on these? Maybe they'll figure out how to make the steel on molecule thick. That'll save some cash...


  2. #2
    Senior Tech 1,000+ Posts
    c4502 c5502 Feedder

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,122
    Rep Power
    54

    Re: c4502 c5502 Feedder

    I just use a little piece or 2 of velcro/double sided tape to hold the cover down after the tab breaks off. Works great, looks good.

    NEVER ASSUME ANYTHING

  3. #3
    Senior Tech 250+ Posts
    c4502 c5502 Feedder

    tinfox's Avatar
    Join Date
    Nov 2007
    Posts
    284
    Rep Power
    25

    Re: c4502 c5502 Feedder

    Quote Originally Posted by mikadonovan View Post
    I just use a little piece or 2 of velcro/double sided tape to hold the cover down after the tab breaks off. Works great, looks good.
    Thank you! That's actually a great idea. On mine nothing is broken (yet). Also just to be clear on which cover I mean here is a bad pic.

    c5502feedercover.jpg


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here