Results 1 to 6 of 6
  1. #1
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    SPC840dn PCDU mods

    Hey guys,
    We have a bit of an issue where we have a crap load of D2442204 (or D239) PCDU on back order for the MPC2004/2504 machines.
    The Service manager at Ricoh has suggested that we use the 408034 and 408035 maintenance kits.
    Yes...I can hear you all typing "Why are Ricoh recommending the use of maintenance kits in a copier model" ..we though the same.
    Has anybody here used the maintenance kit at all?
    Any mods to be done?...I assume it'll need the TD sensor swapped over.
    Also...in the TPRD for the SPC840dn there are TWO different Maintenance kits.
    One is a User replaceable version with a 60k pm cycle and the other is a Service Maintenance model and rated at 200k.
    Any advice is appreciated

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: SPC840dn PCDU mods

    Fitting one tomorrow to a 4504, will let you know.

  3. #3
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: SPC840dn PCDU mods

    Quote Originally Posted by davel View Post
    Fitting one tomorrow to a 4504, will let you know.
    Take some pics for the larger forum community ?
    We've ordered a Black pcdu and colour kit,an ITB assy and a fuser...going all out

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Aug 2012
    Posts
    276
    Rep Power
    28

    Re: SPC840dn PCDU mods

    Oze the SPC840 kits wont fit into a 2004/2504 they are completely different

    they do fit into a 4504/6004 with modification

  5. #5
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,316
    Rep Power
    86

    Re: SPC840dn PCDU mods

    Quote Originally Posted by Imprestik View Post
    Oze the SPC840 kits wont fit into a 2004/2504 they are completely different

    they do fit into a 4504/6004 with modification
    Correct - you need to swap the Toner density sensor and the front cover won't fit without cutting away some plastic or leave it away. You also should use manual new unit set SP for initializing the new unit properly.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: SPC840dn PCDU mods

    Sorry no pics but just split the dev unit and PCU then you can get to TD sensor, remove the TD sensor connector for printer version, trim right side of front cover to fit. Don’t forget to do SP 3701 for the colour you are doing.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here