Hello,
i have a SPC 352DN with a SC 332- 01
I changed all PCU an checked if the Black Toner Bottle works ( runs ) correct.
Any ideas ?
Thanks
Roger
Hello,
i have a SPC 352DN with a SC 332- 01
I changed all PCU an checked if the Black Toner Bottle works ( runs ) correct.
Any ideas ?
Thanks
Roger
Add toner by hand to the black PCU. If the unit prints a few pages before the code returns you obviously have an issue with the shutter not opening or a bad toner supply clutch. Not completely sure but I'll bet the toner supply clutches are the same for all 4 colors so maybe you can swap the black clutch for one of the color clutches to diagnose the issue.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Hi Folks,
finally i am happy to inform you,that i already fixed the Problem of this Maschine.
A Plastic-Part (shown in Picture ) blocked the alu-Rail of the open-mechanism of all the
Toner-Bottles ( Position marked with 2 XX ).
I dont now what and where this plastic Part came from..................
greetings
Roger
20181031_074803_resized2.jpg20181031_071348_resized_1.jpg
Bookmarks