thanks i have checked and double checked. the only thing am yet to change is the thermostats which i have ordered. but what beats my mind is that the furser doesnt even turn. i mean both rollers. is that normal?
if the machine is in error state your motors MAY NOT MOVE. clearly a fuser related issue.. swap with known good ... reset codes.
if the machine is in error state your motors MAY NOT MOVE. clearly a fuser related issue.. swap with known good ... reset codes.
Error state has nothing to do with it. Derived from graphs in the detailed description portion of the service manual, if the temperature of the fusing unit is below 100C the main motor is not turned until the temperature reaches 200C.
Bookmarks