Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Technician
    Join Date
    Sep 2015
    Location
    London
    Posts
    13
    Rep Power
    7

    Re: Ricoh MP 3045 toner light

    Quote Originally Posted by slimslob View Post
    Are you sure you have the correct toner bottle? Some older models used a different bottle. Same diameter, same length, the only difference was the bottom of the bottle where the toner motor drives the bottle.

    With the previous model number, the 2045, there were two different version. The 2045 and the 2045e used different bottles. Symptom of the wrong bottle was exactly what you are getting.
    I will double check the toner type but they get it from us...
    Thanks!


  2. #12
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,545
    Rep Power
    185

    Re: Ricoh MP 3045 toner light

    Quote Originally Posted by stek View Post
    I will double check the toner type but they get it from us...
    Thanks!
    You might want to double check your shelf stock also.


  3. #13
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba
    Posts
    1,244
    Rep Power
    37

    Re: Ricoh MP 3045 toner light

    When these units come due for a PM we generally just replace the entire PCDU which come pre loaded with dev.
    The only time I've struck something like this was when I replaced the PCDU and forgot to remove the bung from the dev unit...woops
    Copies would go light.....and you could perform a forced toner successfully(according to the SP result) but copies would stay light.
    Took me a good 20 mins to figure that one out.


  4. #14
    Technician
    Join Date
    Nov 2012
    Location
    Tg Mures
    Posts
    39
    Rep Power
    13

    Re: Ricoh MP 3045 toner light

    put some toner from bottle into developer unit ( about 2 spoons ) .
    do about 50 prints , c if quality changes


  5. #15
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,545
    Rep Power
    185

    Re: Ricoh MP 3045 toner light

    Quote Originally Posted by whitecat View Post
    put some toner from bottle into developer unit ( about 2 spoons ) .
    do about 50 prints , c if quality changes
    Obviously you have not read this original post. This thread has to do with the add toner light staying on, not light CQ.


  6. #16
    Technician
    Join Date
    Sep 2015
    Location
    London
    Posts
    13
    Rep Power
    7

    Re: Ricoh MP 3045 toner light

    Going to try some of these suggestions. I will post my findings. Thanks to all!


  7. #17
    Service Manager 1,000+ Posts bob marley's Avatar
    Join Date
    Jan 2012
    Posts
    1,086
    Rep Power
    28

    Re: Ricoh MP 3045 toner light

    Quote Originally Posted by stek View Post
    I did initialize the dev too. Would the dev initialize with a bad TD sensor?
    Thanks again!
    was there any sc after u initialized the dev (sp 2801) like sc 390 or 391? if yes replace the TD sensor

    Live for yourself and you will live in vain. Live for others, and you will live again

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here