how to convert mp4001 to 5001

[chand226]

how to convert mp 4001 to 5001
and mp 4000 to 5000

[icese]

[QUOTE = chand226; 700490]如何將mp 4001轉換為5001
並將mp 4000轉換為5000 [/ QUOTE]
更換前門蓋的型號。（把前門蓋的型號更換就可以了）

[slimslob]

[QUOTE = chand226; 700490]如何將mp 4001轉換為5001
並將mp 4000轉換為5000 [/ QUOTE]
更換前門蓋的型號。（把前門蓋的型號更換就可以了）

Translation:
Replace the model of the front door cover. (Replace the model of the front door cover)

This will not change the speed of the machine. The model is also on the serial number plate. If you want a 50 ppm machine you need to buy one. If you really want to try, you will need to replace the controller board and the BICU. You will also need the front door and back cover with serial number from a 5001.

[fshead]

easy>>
a sharpee that can turn the 0 to 1.................

I always get a kick with these "Young Frankensteins"....

[slimslob]

With all the things that you are going to have to take off an existing 50 ppm machine why not just use it.

[fshead]

well at least he didnt ask how to make a color copier into a b/w...........

[chand226]

well at least he didnt ask how to make a color copier into a b/w...........

haha

[keithxxiii]

5907 changes your model....but not the speed

[slimslob]

5907 changes your model....but not the speed

If I remember correctly, it only allows you to change make. It will not allow selecting a model that does not correspond to the speed identified by the serial number.

[fuwei2422]

first : CTL
sec:BICU