Ricoh mpc3002 color ajustment issue

[fadsamniote]

Hello everyone ...
I got this color issue on RICOH MPC3002 when ajusting the color on "Maintence" setting ... What it could be ?
Allready changed ITB and PCDU's , Cleaner laser and lens optic ...

IMG-20180628-WA0003.jpg

[copier tech]

Looking at your print sample I cant see what issue you have?

[keithxxiii]

Looking at your print sample I cant see what issue you have?

the same thing i was afraid to ask

[muhammadreza]

Hello everyone ...
I got this color issue on RICOH MPC3002 when ajusting the color on "Maintence" setting ... What it could be ?
Allready changed ITB and PCDU's , Cleaner laser and lens optic ...

IMG-20180628-WA0003.jpg

i dont see any problem in your color can you highlight the problem ?

[logrady2331]

I think he's talking about the gradation pattern.

[logrady2331]

I've seen it before and fixed it with a reset of.....somewhere in the 5's. Reset then run gradation again. There's a post on this issue somewhere in this forum but it's been a bit.

[Andyboachie]

I've seen it before and fixed it with a reset of.....somewhere in the 5's. Reset then run gradation again. There's a post on this issue somewhere in this forum but it's been a bit.

I don't think you'll find any problem when you make a copy.

[Michael Craig]

I suggest you clean your ID sensor array.

[StephenB]

If you "restore" the maintenance adjustment to the previous setting, does it fix the problem ?

I have that same problem, have yet to find a solution.

[adoug]

Try resetting the printer application in service mode think it's 5-801-7 and try ACC again