MPC 306 CC Problem

[Roger67]

Hello,

i have a MPC 306 who cames with the Problem of totaly not printing the Cyan Color.

I changed

- all PCDU `s
- cleaned the ID Sensors
- changed the BCU temporarly
- changed two two laser Units within ( from left to the right and from right to the left )
- i checked the HV Board

After changing the Laser and adj the MUSIC the Cyan Color is back on the Chart,but to do the calibaration,only the copy-mode
works.
In printing Mode the Sheets are printed in the wrong direction.....( watch Picture )

Calibration is not Possible.
I also upgradet the FW,JAVA and Cheetah FW.

Any Ideas ?'

Thanks
ROger

[Zeldaman]

Hi there!
After "changing" the ph´s try this sp´s. Hope this helps.
Greetings...