Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: aficio 2022

  1. #11
    Retired 10,000+ Posts
    aficio 2022

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,130
    Rep Power
    989

    Re: aficio 2022

    Quote Originally Posted by fshead View Post
    do your lungs and customer a favor and blow that machine up..
    I both loved and hated that stupid drum unit...
    You can try a new 1027 but they wont last long and that leakamatic will scatter toner on your feed rollers and tray
    in time..
    Quote Originally Posted by jonhiker View Post
    replace the pcu, this model uses the 1027 PCU, i think the number is 411018.. the type 1027 were not meant to be rebuilt in the field, but swapped out as a whole unit. the old unit is then sent to a place that rebuilds them.
    If you get a "new" PCU and the product either starts or end with a "R" it is a Rebuilt unit.

  2. #12
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: aficio 2022

    Forgotten to mention:
    The front ball bearing of the pressure roller is not at the proper place, due to the green lever wich has been broken (green lever for customer to easily remove jamed paper).
    Or bad paper !!!

  3. #13
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: aficio 2022

    First, I'm leaning towards toner on the slit glass...

    Second, fuser press roller jumped out of postion ???

    Scan a sample copy of the fault and post the image to the forum.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  4. #14
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: aficio 2022

    Quote Originally Posted by Gab View Post
    Image at the half was ok but at the other half were white areas like waves. I have seen it a lot of times when developer is missing.
    Because customer didn't want to spend lot of money i replaced developer (type 28) and alla gears. Executed 2 802 and 2 802 programs. first it worked fine but next day the same problem . Any idea(except to replace the hole drum unit) ?
    Dev init is 2801, just use 411018.

  5. #15
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: aficio 2022

    Quote Originally Posted by Mark Bbb View Post
    It's the paper.
    The paper it is.

    Xerox or IBM businnes paper (cheapest paper of the 2)
    Which paper do they use?
    OR
    You have put a 3030 F.U. in
    I haven't made myself clear enough:
    the PCU (and sometimes hot roller) is contaminated with gasses of cheapest paper. So, you need to
    1. use better paper (Ricoh is ok)
    2. replace pcu
    Never use a 3030 fusing unit in a 2022 or v.v. !!!! Thaht might give the same problems!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here