Forgotten to mention:
The front ball bearing of the pressure roller is not at the proper place, due to the green lever wich has been broken (green lever for customer to easily remove jamed paper).
Or bad paper !!!
First, I'm leaning towards toner on the slit glass...
Second, fuser press roller jumped out of postion ???
Scan a sample copy of the fault and post the image to the forum.
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
I haven't made myself clear enough:
the PCU (and sometimes hot roller) is contaminated with gasses of cheapest paper. So, you need to
1. use better paper (Ricoh is ok)
2. replace pcu
Never use a 3030 fusing unit in a 2022 or v.v. !!!! Thaht might give the same problems!
Bookmarks