Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: aficio 2022

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    237
    Rep Power
    0

    aficio 2022

    Image at the half was ok but at the other half were white areas like waves. I have seen it a lot of times when developer is missing.
    Because customer didn't want to spend lot of money i replaced developer (type 28) and alla gears. Executed 2 802 and 2 802 programs. first it worked fine but next day the same problem . Any idea(except to replace the hole drum unit) ?

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jul 2010
    Posts
    69
    Rep Power
    0

    Re: aficio 2022

    Did you cheched if toner is fall in to the developer unit? Maybe stuffy toner unit.?

    Sent from my G8441 using Tapatalk

  3. #3
    Technician ridgemill's Avatar
    Join Date
    Sep 2017
    Location
    Bristol
    Posts
    39
    Rep Power
    4

    Re: aficio 2022

    A simple replacement of a drum type 1027 should do.

    If the customer is worried about the cost, you can tell them that the average life of the drum is much more than the stated life of 60,000 copies.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2015
    Location
    Orange City, FL
    Posts
    137
    Rep Power
    8

    Re: aficio 2022

    Gab, sounds like your toner density went low, this is probably due to not fully removing all the old developer.
    The rear auger chamber is sealed, and requires alot of effort to get all the old dev out. (from experience of faiuled and successful rebuilds)
    If there is to much developer, the density drops. Katun also offers a replacement gear kit !

    Dont waste your time on only developer, do drum, dev, blade and gears.

    If it's a high volume, quality important account...just replace the drum unit. Don't loose a client over this minor repair

  5. #5
    Trusted Tech 50+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    milano
    Posts
    77
    Rep Power
    3

    Re: aficio 2022

    Quote Originally Posted by Gab View Post
    Image at the half was ok but at the other half were white areas like waves. I have seen it a lot of times when developer is missing.
    Because customer didn't want to spend lot of money i replaced developer (type 28) and alla gears. Executed 2 802 and 2 802 programs. first it worked fine but next day the same problem . Any idea(except to replace the hole drum unit) ?


    try cleaning the mirrors of the laser polygon engine

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    734
    Rep Power
    22

    Re: aficio 2022

    It's the paper.
    The paper it is.

    Xerox or IBM businnes paper (cheapest paper of the 2)
    Which paper do they use?
    OR
    You have put a 3030 F.U. in

  7. #7
    Just a tech 100+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    203
    Rep Power
    12

    Re: aficio 2022

    Quote Originally Posted by Gab View Post
    Image at the half was ok but at the other half were white areas like waves. I have seen it a lot of times when developer is missing.
    Because customer didn't want to spend lot of money i replaced developer (type 28) and alla gears. Executed 2 802 and 2 802 programs. first it worked fine but next day the same problem . Any idea(except to replace the hole drum unit) ?
    Could it be the magnetic roller? I had this problem from a MP4000 machine. Prints patterns of waves when you do an almost full coverage print.
    Aye! Cut the crap

  8. #8
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,602
    Rep Power
    186

    Re: aficio 2022

    If the machine is not level front to back, you will get this problem.

  9. #9
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,101
    Rep Power
    38

    Re: aficio 2022

    do your lungs and customer a favor and blow that machine up..
    I both loved and hated that stupid drum unit...
    You can try a new 1027 but they wont last long and that leakamatic will scatter toner on your feed rollers and tray
    in time..

  10. #10
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    621
    Rep Power
    26

    Re: aficio 2022

    replace the pcu, this model uses the 1027 PCU, i think the number is 411018.. the type 1027 were not meant to be rebuilt in the field, but swapped out as a whole unit. the old unit is then sent to a place that rebuilds them.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here