getting this image on copier. the pct was changed ran fine for a while, not streak in the same spot? could be fuser?
getting this image on copier. the pct was changed ran fine for a while, not streak in the same spot? could be fuser?
Depending on the number of pages on the machine, the first thing I would check would be the transfer belt cleaning blade. (D2416141)
They're rated for around 300K, so check your counters.
103,000 on the b/w / and 60,000 on color
It shouldn't be the black PCU...those are rated for 400K. Same with the fuser rollers/sleeve. In order to eliminate the fuser, pull it and inspect it. If there are lines on the roller/sleeve that correspond with the marks on the pages, then you might have an early failure.
Same with the BK Drum unit....pull and inspect for corresponding marks.
yes sir, i looked at them and all looked good. my waste catch is full and needs changed. I'm waiting on new one. i wonder if its overflow?
Looks like a K pcu issue to me.
NEVER ASSUME ANYTHING
thats what I'm thinking, it only has 20k on it. we just changed it. i wonder if defective one
could be the charge roller of the K drum
Aye! Cut the crap
any suggestions on where to buy a transfer unit or anyone that rebuilds them?
ty for the help guys
Bookmarks