Ricoh mpc3002

[vicalvarez]

Hey techs i have a que atinó ira normal to hapen on the cleaning roller on black drum
I read on this fórum about the spring on the lubricant Bar because i see a lot of toner at the lubricant bar and excesive waste of lubricant bar dust inside ,at this áreas drum and blade and black cleaning roller any ideas thanks


Enviado desde mi iPhone utilizando Tapatalk

[davel]

Replace black PCU.

[copier tech]

Replace black PCU.

They can fail with age before reaching PM life.

[keithxxiii]

They can fail with age before reaching PM life.

+1 to that. I always had a fight with the guy who approves my requested parts when I was on the field. Guy says "the device did not reached it's PM yield" and I was like "get you a** down here and have a look on the machine".

[Mark Bbb]

if drum is still ok, you can consider to clean it all up and replace only the lubricant bar.
You can order them on ebay (China import)

[davel]

look at the picture the charge cleaner has had it.

[fshead]

look at the picture the charge cleaner has had it.

that is the soft cleaning roller under the charge roller.
it does not touch the lub bar..has nothing to do but clean funk off charge roller
You can swap a used one or buy a new one as Mark Bbb said in previous post.

[TonerMunkeh]

That cleaning blade looks as if it's well past due for changing, just replace it.

[vicalvarez]

fixed whith another roller



Enviado desde mi iPhone utilizando Tapatalk