does anyone know how to reset the maint message on a ricoh sp 4500 after replacing the maint kit
Thanks
Gary
does anyone know how to reset the maint message on a ricoh sp 4500 after replacing the maint kit
Thanks
Gary
Do you mean MP 4500 , B/W machine? If so then you have to go into Service Mode and in the 7-xxx section there will be counter resets.
This is a printer. If the maintenance counter is not reset when replacing the units, then you need to go into service mode and reset them from there.
It does happen every now and then.
New unit detect is turned on by default.
No need to reset anything.
Bookmarks