SMB scan

[kopirmaster]

Hello to everyone.
I have problem with last update on windows 10 with scan to folder wia smb .Machine network support firmware is up to date ,smb 1.0 feature is check .everything is normal and it works since last windows update . Does someone know what can cause the problem and how to fix this situation .
Thanks

[slimslob]

What is the machine model?

[guitar9199]

Check your Network Connection, and make sure it's not set to "Public". Then go into Control Panel> Network and Sharing Center. Go into the network port being used, click "Properties", then select IPv4 Properties>Advanced... click the WINS tab, and change to "NETBios over TCP/IP. The default "NETBios over DHCP" doesn't play well with SMB.

Back in Control Panel, go to Windows Firewall>Advanced Settings, and under your Inbound Rules, make sure all instances of "File and Printer Sharing" are set to "Allow".

[kopirmaster]

What is the machine model?

Mp 201/301 .

[kopirmaster]

Check your Network Connection, and make sure it's not set to "Public". Then go into Control Panel> Network and Sharing Center. Go into the network port being used, click "Properties", then select IPv4 Properties>Advanced... click the WINS tab, and change to "NETBios over TCP/IP. The default "NETBios over DHCP" doesn't play well with SMB.

Back in Control Panel, go to Windows Firewall>Advanced Settings, and under your Inbound Rules, make sure all instances of "File and Printer Sharing" are set to "Allow".

Thanks, i will try tomorow and update the status here .

[kopirmaster]

Finally i found what cause the problem . With last update on windows 10 you have to check "file and printer sharing over smbdirect" in windows firewall .
Thanks to all .

[DougD]

Finally i found what cause the problem . With last update on windows 10 you have to check "file and printer sharing over smbdirect" in windows firewall .
Thanks to all .

Interesting.
My test mule running Win 10 1809 only required a firmware update on my MP 171 to setup scan to folder.