Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jul 2009
    Location
    Den Bosch
    Posts
    252
    Rep Power
    0

    3000 sheet finisher

    Hi,

    Does someone know if the 3000 sheet/booklet finisher on an MPC5000 compatable is with the 3000 sheet/booklet finisher on an MP5002
    Looks the same on the outside . . .. .
    The one on the MP5002 has big problems on the exit tray when shifting and stapling the sets, it gives an loud noise when the paper is fed on to the staffel exit tray...

    Someone?
    Thanks in advance
    not much experience with the 3000"s

  2. #2
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    Mexifornia
    Posts
    442
    Rep Power
    27

    Re: 3000 sheet finisher

    Doubtful, the MPc5000 uses the SR3030 and the MP5002 is the SR3120.
    Check the exit tray drive motor, seen them go bad and make noise.

  3. #3
    Field Supervisor 500+ Posts
    3000 sheet finisher

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    588
    Rep Power
    16

    Re: 3000 sheet finisher

    Agreed with tufbnme ... The C5000 uses the SR3030 finisher, while the MP5002 uses the SR3120. Cosmetically they may LOOK the same, but other than a couple of parts that are interchangable, they are different!

    Pull the front and rear covers off, and check the ARMS of your lower tray. I've had a couple get the "Samsonite Luggage" treatment from being shipped in, and the arms were all bent to snot!! It takes some straightening and tweaking to get everything to line back up so the lower tray moves up and down smoothly.

    Good luck.



  4. #4
    Senior Tech 1,000+ Posts
    3000 sheet finisher

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,130
    Rep Power
    54

    Re: 3000 sheet finisher

    If it's a knocking noise, you may need to replace the sponge rollers on the finisher lower tray. I have to replace them CONSTANTLY.
    NEVER ASSUME ANYTHING

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2008
    Posts
    63
    Rep Power
    22

    Re: 3000 sheet finisher

    Quote Originally Posted by mikadonovan View Post
    If it's a knocking noise, you may need to replace the sponge rollers on the finisher lower tray. I have to replace them CONSTANTLY.
    Yes. Same here. These rollers make the finishers clunk very loudly when paper is. Exiting to the shift tray.

    Sent from my VS987 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here