SP 5200s

**luca72** · 12-05-2018

Originally Posted by ABS tect

Can't get this machine to scan for the life of me...ive saved several past forums but cant seem to find the magic thing i need to change.

Interface settings list matches to another machine that can scan (another 5200s)

I did SP 5-832-001, 5-801-10,11 5-846-046

Network Security level set to 1, http is up, ipv4 is active.

Any ideas why it wont scan? I am scanning to folder on windows 7, it is just this printer so i know its not the computer or network.

Thanks in advance!

I also think as guitar9199 would seem that the smb1 has not been used for more than 15 days is disabled, check in "activate / deactivate windows functionality" now I have no win10 in front, but basically: smb1 = on and remove the flag from " disable if not used "... since you say that on the other side by side with the same settings works.

**Oze** · 12-06-2018

Having a similar issue with an SP5210SR scanning to 2 new win 10 pc's.
Check that the network settings are set to "Private" on not "Public".
MY issue does seem to be SMB v1 on the new pc's as 2 other pc's can scan to folder.
If I can't get around it it'll be FTP scanning for this customer