Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    No print. Ping and WIM work>>>Network security???

    greeting and happy holidays to all.
    I am posting this as i know many of the better techs do the full line of ricoh copiers,printers and wide format.And maybe this setting is universal across all lines.
    I had someone pick up a used spc431dn printer that i "think" i tested on network 4-5 months back..It is a 2 hour ride from me so just dropping in is not easy.
    I am older and dont remember everything like i once did.
    It wont print via nic nor usb hub. Can reset to normal via service mode or WIM?
    No Print, WIM and Ping work ..
    found this in GG

    No print. Ping and WIM work - Network security, user settings selected
    No Print, WIM and Ping work - Enhanced Lock Print enabled

  2. #2
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    463
    Rep Power
    28

    Re: No print. Ping and WIM work>>>Network security???

    Is there an error logged from the WIM? I suggest, disable the virtual printer, set the network security level to 0.
    Aye! Cut the crap

  3. #3
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: No print. Ping and WIM work>>>Network security???

    thanks.
    i am not on site"its 2 hour drive from me" and customer picked up unit from me.
    I did advise both trying to log in WIM, and ping IP address"both worked".
    If the hard drive went bad from moving or being banged around would it code a sc code and would it still try to print?
    I dont do too many of these as moving 130 lb printers is not for the solo tech.
    Can I do a 5801-02 or -03 to put unit back to default"out of the box settings"??

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: No print. Ping and WIM work>>>Network security???

    You write:
    i am not on site"its 2 hour drive from me"

    i do think you should do the trip...


  5. #5
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: No print. Ping and WIM work>>>Network security???

    I've had the Java card cause stupid crap like this on the 431.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: No print. Ping and WIM work>>>Network security???

    win 10?

  7. #7
    Service Manager 1,000+ Posts
    No print. Ping and WIM work>>>Network security???

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,090
    Rep Power
    41

    Re: No print. Ping and WIM work>>>Network security???

    Quote Originally Posted by fshead View Post
    greeting and happy holidays to all.
    I am posting this as i know many of the better techs do the full line of ricoh copiers,printers and wide format.And maybe this setting is universal across all lines.
    I had someone pick up a used spc431dn printer that i "think" i tested on network 4-5 months back..It is a 2 hour ride from me so just dropping in is not easy.
    I am older and dont remember everything like i once did.
    It wont print via nic nor usb hub. Can reset to normal via service mode or WIM?
    No Print, WIM and Ping work ..
    found this in GG

    No print. Ping and WIM work - Network security, user settings selected
    No Print, WIM and Ping work - Enhanced Lock Print enabled
    I think you might have already answered your own question. If you can get into the interface and you can ping the IP, then you've eliminated the network as a culprit. "User Settings, Enhanced Print Lock Enabled?"... What do you think the customer MIGHT have keyed in a User code, and have set their print driver up with the WRONG code?

    ...I've seen that happen more than a few times. Check the print job history...if you see the jobs hitting the copier, but not printing...then check their user code.

    Good luck.

  8. #8
    Retired 10,000+ Posts
    No print. Ping and WIM work>>>Network security???

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: No print. Ping and WIM work>>>Network security???

    Quote Originally Posted by guitar9199 View Post
    I think you might have already answered your own question. If you can get into the interface and you can ping the IP, then you've eliminated the network as a culprit. "User Settings, Enhanced Print Lock Enabled?"... What do you think the customer MIGHT have keyed in a User code, and have set their print driver up with the WRONG code?

    ...I've seen that happen more than a few times. Check the print job history...if you see the jobs hitting the copier, but not printing...then check their user code.

    Good luck.
    A quick check is to have someone send a print job while you watch the print job light on the MFP. If it is an ID code problem, the light will come on momentarily.

  9. #9
    Retired 10,000+ Posts
    No print. Ping and WIM work>>>Network security???

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: No print. Ping and WIM work>>>Network security???

    Quote Originally Posted by fshead View Post
    greeting and happy holidays to all.
    I am posting this as i know many of the better techs do the full line of ricoh copiers,printers and wide format.And maybe this setting is universal across all lines.
    I had someone pick up a used spc431dn printer that i "think" i tested on network 4-5 months back..It is a 2 hour ride from me so just dropping in is not easy.
    I am older and dont remember everything like i once did.
    It wont print via nic nor usb hub. Can reset to normal via service mode or WIM?
    No Print, WIM and Ping work ..
    found this in GG

    No print. Ping and WIM work - Network security, user settings selected
    No Print, WIM and Ping work - Enhanced Lock Print enabled
    Is the problem only with one computer and only with the SP C431? I have seen protection suites such as McAfee block TCP/IP printing if the user fails to allow it the first time a print job is sent.

  10. #10
    Major Asshole! 2,500+ Posts
    No print. Ping and WIM work>>>Network security???

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: No print. Ping and WIM work>>>Network security???

    More than once I had solved that kind of problem by power cycling the network switch where the machine is connected. It's a long shot, but doesn't hurt.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here