MP C2003 SC240-04 LD Error Magenta

[slimslob]

Ahh!! hadn't thought of that, might save my legs and back from standing in front of machine for hours as I work my way thru all the SP settings. Thanks

If you go for All it is stil going to take awhile but you can sit down and wait. You also might want to setup Capturing the debug logs. Right after Address book Upload/Download in the C2003/C2503 service manual, probably the same place in the main CXX03 manual.

[Lagonda]

This is getting worse!!
There is a spare MP C4503 in the workshop used for testing, training and a emergency spares source. Someone has had the laser unit out and now it's showing SC240-04 as well.

[BLADE]

This is getting worse!!
There is a spare MP C4503 in the workshop used for testing, training and a emergency spares source. Someone has had the laser unit out and now it's showing SC240-04 as well.

merry xmas to Karate Tech, Resentful Tech and yourself from everyone at CTN

[Lagonda]

Think I might have found the some of the problem.......


20181221_140401.jpg

[slimslob]

Think I might have found the some of the problem.......


20181221_140401.jpg

I do believe that would definitely cause some type of problem.

[Oze]

Think I might have found the some of the problem.......


20181221_140401.jpg

So who had the eproms out in the first place?

[Lagonda]

So who had the eproms out in the first place?

Since it is Christmas and the season of good will to all men I shall diplomatically not name names. (but it wasn't me)

[Zaxxon]

Since it is Christmas and the season of good will to all men I shall diplomatically not name names. (but it wasn't me)

The Elf of course

[Lagonda]

Found it!!!
After a lot of sweat, sleepless nights and high blood pressure we managed to get this box to suddenly remember it's supposed to be a photocopier.
First another set of NVRAM chips were fitted to replace the ones that had been fitted incorrectly but still got a SC240-04 code. Boss came up with the bright idea to zero the skew mirrors with SP 2118 then it would let you run SP 2110-5 to re-upload the setting info from the chip in the laser unit and bingo! away it went.

Couldn't find any reference to that in the manual and even NTS didn't know that trick.

[copier tech]

Found it!!!
After a lot of sweat, sleepless nights and high blood pressure we managed to get this box to suddenly remember it's supposed to be a photocopier.
First another set of NVRAM chips were fitted to replace the ones that had been fitted incorrectly but still got a SC240-04 code. Boss came up with the bright idea to zero the skew mirrors with SP 2118 then it would let you run SP 2110-5 to re-upload the setting info from the chip in the laser unit and bingo! away it went.

Couldn't find any reference to that in the manual and even NTS didn't know that trick.

Thanks for the update, maybe SP2118 was the answer all along!