Hello
I have two machines MPC2011 with this noise. It happens in the morning or when the machine is out of work for a long time.
Please see:
YouTube
I already tested the fusing unit. The machines have about 5,000 ptints.
What will it be?
Thanks
Hello
I have two machines MPC2011 with this noise. It happens in the morning or when the machine is out of work for a long time.
Please see:
YouTube
I already tested the fusing unit. The machines have about 5,000 ptints.
What will it be?
Thanks
The toner pump coils? Are you using original toner?
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
It's an issue that is widely known. They are just crappy parts put in during production. Only thing to do is replace the sub-hopper that is affected. Pretty easy job.
We've also had a couple machines where the waste toner transport coil breaks, and backs up into the units. This occurrence is much more of a pain in the ass, and usually have to replace Development units along with it, or you'll just keep getting issues going forward.
Good day , did you manage to find out where the noise is coming from ?
As I have the same problem. Its only in the morning.
I have checked all drum units and dev units, aswell as fuser gears and ITB.
In sp mode I have ran the output tests on the drum motors, developer motors,fusing fan and fuser motor.
Could the fuser idling settings resolve this issue?
SP1-121-001
SP1-121-002
SP1-121-003
Bookmarks